How To Take Off Quarter Round. Break of all the original brads by holding the brad close to the quarter round with long nose pliers and twist back and forth with a rocking motion, until the brad breaks. They can't be very good. You can lightly tap the pry bar with a hammer to help get under or behind the quarter round.
Not always the easiest thing to do. They can't be very good. Great when installing laminate flooring or removing base wall trim as.
But over the years i've found this method the best. You can buy a box of short 1 brads at the hdw store.
I'm getting ready to sand and refinish the oak floor in the hallway. You can lightly tap the pry bar with a hammer to help get under or behind the quarter round.
Great when installing laminate flooring or removing base wall trim as. I'm getting ready to sand and refinish the oak floor in the hallway.
#5 · nov 21, 2011 (edited) the quarterround can stay right where it is. If the quarter round is wood to match the flooring, it just looks like the floor is starting to creep up the wall.
They can't be very good. Use the pointed corner along the top edge and inside the grooves. Great when installing laminate flooring or removing base wall trim as.
Not always the easiest thing to do. Toe kicks often have a quarter round, or convex molding, between the board and the flooring, so you will need to remove this first. You can use a piece of cardboard between the pry bar and whatever you’re going to be pressing up against to pry.
Use the long nose pliers to start the brads with a. Break of all the original brads by holding the brad close to the quarter round with long nose pliers and twist back and forth with a rocking motion, until the brad breaks. Much cleaner look that way.
You can lightly tap the pry bar with a hammer to help get under or behind the quarter round. Then use the angled side to sand the quarter round trim. If the quarter round is wood to match the flooring, it just looks like the floor is starting to creep up the wall.
Here's a quick video showing how to remove wooden (oak) quarter round trim. As others mentioned, a cats claw could probably work. Then pull the pry bar toward you to pop off the quarter round.